Starting Up Your Pool
When starting up a reopened or freshly filled pool, make sure the filtration system is clean and operating properly. Clean any and all debris out of pool. Bring a quart of pool water in to have it professionally analyzed for proper water balance.
Proper chemical and balance levels:
pH - 7.4-7.6
Free Chlorine - 1.0 - 3.0 ppm |
| Alkalinity: |
Masonry Pool Surfaces...80 -125 ppm. (plaster)
Non-Masonry Pool Surfaces...125-150 ppm. (Vinyl/Fiberglass) |
| Hardness: |
Masonry Pool Surfaces...200-250 ppm. (plaster)
Non-Masonry Pool Surfaces...200-250 ppm. (Vinyl/Fiberglass) |
| Stabilizer: |
30-80 ppm. (Cyanuric Acid) |
Note:
- Proper balanced pool water not only saves you money on c
hemical usage, it also protects and extends the life of your pools surface and filtering equipment.
- After initial pool opening, have your pool water professionally tested every 3 months to maintain proper water balance.
|
|
Full Line of Pool & Spa Chemicals |
Ram Pool & Spa Supplies and Equipment
Pool Care Tips |
Info-Request |
We've Grown Again! | MSDS Sheets |
Contact Us |
Home
© Copyright 1999 - 2009 Ram Chemical and Supply, Inc. All Rights Reserved.
Web Site Design and Hosted by WebWize, Inc. Houston, Texas
|
